Sampling chamber for pharmaceutical industry

As the exhaused air device nearby the area which is incurred and handle pharmaceutical dust, is designed to suit the treatment equipment and workspace. The design takes into account maintenance, filter replacement.

Đặc điểm

Thông số kỹ thuật

Kích thước

Các tính năng khác

Đặc điểm

Depending on the processing equipment and the work content, the chamber size is appropriately designed
In the final filter, the HEPA filter is used, the previous stage uses the pre filter. Install neutral filters
The design takes into account filter maintenance.

Thông số kỹ thuật

Walking chamber – Sampling chamber (no table)

Model	ATV-AMR-1900S
Filtration Efficiency	Over 95% at 0.3μm
Filters	Main filter: HEPA filter Pre filter: Polyure foam
Air volume	Abt 93m³／min　* Capable of change
Inlet air velocity	Abt 1.2m／sec 　*Capable of change
Noise level	Abt 8dBA *With equipment 1m, FL1m
Power supply	AC200V 3Φ 50/60Hz
Adjust the air volume	Mode of changing the inverter * Use on 40Hz
Power equipment	Abt 1400VA
Lighting	20W×4 * Daylight color
Brightness	About 500Lux * Inside the working roomFL ＋ 1m
Weight	Abt 390kg
Structure	Object: Type of steel sheet with heat-resistant paint Side panels: Clear, colorless acrylic sheets

Sampling chamber – Buồng lấy mẫu

Model	ATV-ACD-1800S1
Filtration Efficiency	Over 95% at 0.3μmPAO
Filters	Main filter: HEPA filter Pre filter: Nonwoven fabric filter
Air volume	15.5～22.0m³／min±20%　* Capable to change with the frequency converter
Inlet air velocity	0.35～0.5m／sec ±20%　* With the front part of pre filter
Power supply	AC100V 1Φ 50/60Hz
Power consumption	Abt 400W　* Including capacity of service power source
Power equipment	Abt 500VA　*Fan, Lighting system、highest outlet under 10A
Lighting	32W×2 (Hf type, daylight color)
Weight	Abt 550kg
Structure	Object: SUS304 Horizontal plate: Tempered glass t3 (Dispersion prevention film)
Option	Pressure difference meter of main filter (0 ～ 300Pa, 3 ends)